Parker AC30 series User Manual

Parameter Reference C-195
AC30 series Variable Speed Drive
Skip Frequencies
Setup::Application::Skip Frequencies
Function availability depends on macro selected.
This function is used to prevent the Drive operating at frequencies that cause mechanical resonance in the load.
Parameter Name
No.
Path
Default
Range
Units
Writable
Skip Band 1
1908
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The width of skip band 1 in Hz.
Skip Frequency 1
1909
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The centre frequency of skip band 1 in Hz.
Skip Band 2
1910
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The width of skip band 2 in Hz.
Skip Frequency 2
1911
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The centre frequency of skip band 2 in Hz.
Skip Band 3
1912
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The width of skip band 3 in Hz.
Skip Frequency 3
1913
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The centre frequency of skip band 3 in Hz.
Skip Band 4
1914
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The width of skip band 4 in Hz.
Skip Frequency 4
1915
Setup::Application::Skip Frequencies
0.0 0.0 to 1000.0 Hz ALWAYS
The centre frequency of skip band 4 in Hz.

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485