Parker AC30 series User Manual

6-24 Setup Wizard
AC30 series Variable Speed Inverter
Communications
On this tab the Communication to and from the Drive can be configured.
Figure 9-9 Drive Communications setup
If required, the built in Modbus can be setup from, the “Base Modbus Communication” selection.
If an optional Fieldbus is fitted, it can be configured from the “Comms Option” selection.

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485