Parker AC30 series - Appendix D: AC30 Series Product Codes; Understanding the Product Code; AC30 Series Control Module

AC30 Series Product Codes D-1
AC30 series Variable Speed Drive
Appendix D: AC30 Series Product Codes
Understanding the Product Code
The unit is fully identified using an alphanumeric code. This records how the inverter was calibrated, and its various settings when dispatched
from the factory. This can also be referred to as the Product Code.
AC30 SERIES CONTROL MODULE
Typical example: 30V-2S-0000 (as shown in the “Order example” above).
This shows the product is an AC30 series versatile controller, with Graphical Keypad fitted, standard 3C3 conformal coating and no special
options.
Note: This product code is for the control module only. The power stack must be ordered in addition to this (see page D-2).
1 2 3 4 5
30 V - 2 S - 0000
1
30 AC30 series control module only (no power stack)
2
V Standard controller
P Advanced controller
D Advanced controller with dual encoder system option
A Advanced controller with absolute encoder system option
3
1
Blanking cover fitted
2 Graphical keypad fitted
4
S
Standard3C3coating
5
0000 No special options
Order example
Special Options
Device Family
Industry
Graphical Keypad
Environmental Coating