Parker AC30 series User Manual

Parameter Reference C-65
AC30 series Variable Speed Drive
Energy Meter
Monitor::Energy Meter
Parameters::Motor Control::Energy Meter
This feature measures the electrical energy used by the motor.
Parameter Name
No.
Path
Default
Range
Units
Writable
Power kW
0380
Monitor::Energy Meter
Parameters
::Motor Control::Energy Meter
x.xx 0.00 to 1000000.00 kW
NEVER
This diagnostic shows the power being delivered to the load in kilowatts.
Power HP
0381
Same as PNO 380
x.xx 0.00 to 1000000.00 HP
NEVER
This diagnostic shows the power being delivered to the load in horsepower.
Reactive Power
0382
Same as PNO 380
x.xx 0.00 to 1000000.00 kVAr
NEVER
This diagnostic shows the reactive power being delivered to the load in kilo volt-amperes reactive.
Energy kWh
0383
Same as PNO 380
x.xx 0.00 to 10000000.00 kWh
NEVER
This diagnostic shows the total energy consumed by the load in kilowatt hours.
Power Factor Est
0385
Same as PNO 380
x.xx 0.00 to 1.00
NEVER
This diagnostic shows the power factor estimate (between 0 and 1).
Power Factor Angle Est
0386
Parameters::Motor Control::Energy
Meter
x.xx 0.00 to 90.00 deg
NEVER
This diagnostic shows the power factor angle estimate.
Reset Energy Meter
0389
Parameters::Motor Control::Energy
Meter
FALSE
ALWAYS

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485