Parker AC30 series - Example PLC Configurations

Fieldbuses A-15
AC30 series Variable Speed Inverter
Example PLC Configurations
Using RSLogix 5000
The example in this section uses the default parameter mapping of the inverter described under Parameter Mapping in the Inverter Configuration
section above:
A CompactLogic L32E controller is used.
1. Start a new project from within RSLogix 5000 and select the required controller.
Input Mapping Table
Data Type
Bytes
000
0627 Comms Control Word
WORD
2
001
0681 Comms Reference
REAL
4
002
0000
Output Mapping Table
Data Type
Bytes
000
0661 Status Word
WORD
2
001
0395 Actual Speed Percent
REAL
4
002
0000