Parker AC30 series User Manual

A-14 Fieldbuses
AC30 series Variable Speed Inverter
Assembly Instances
The assembly instance numbers are:
Electronic Data Sheet (EDS) File
The latest EtherNet/IP EDS file for the inverter may be downloaded from www.parker.com
The EDS file may also be downloaded directly from the drive via a web browser. To access this make sure the parameter 0944 Web Access is
set to LIMITED or FULL.
Enter the inverter IP address into the web browser and access the web page “Services” and under EtherNet/IP EDS file click the Download
button. Alternatively type the following into the browser address bar (replacing ip_address with the inverter’s IP address):
ip_address/eds/eips.zip
Assembly Instance
Number
Input (T2O)
100
Output (O2T)
150
Input only
198
Listen Only
199

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485