Parker AC30 series - SB Retransmit

Parameter Reference C-183
AC30 series Variable Speed Drive
SB Retransmit
Parameters::System Board::System Board IO
Parameter Name
No.
Path
Default
Range
Units
Writable
Output Enable
1678
Setup::Inputs and Outputs::System Board
Option
Parameters::System Board::SB
Retransmit
FALSE ALWAYS
Turns on the system board A, B and Z outputs.
Output Source
1679
Same as PNO 1678 0 0:SYSTEM BOARD SLOT 1
1:SYSTEM BOARD SLOT 2
2:SYNTHETIC ENCDR
3:DIGITAL OUTPUTS
4:MAIN SPD FEEDBACK
STOPPED
Selects the source of the retransmit output. i.e. Slot 1, Slot 2, synthetic encoder, or the Encoder fitted into the main speed feedback.
If SYSTEM BOARD SLOT 1 or SYSTEM BOARD SLOT 2 is selected, the output number of lines is a copy of the source number of
lines.
If MAIN SPD FEEDBACK is selected, then the output number of lines can be set up independantly of the source number of lines (
limited to a max value of 16384 )
Output Voltage
1680
Same as PNO 1678 0 0:5 V
1:12 V
2:15 V
3:20 V
ALWAYS
Sets the voltage output of the system board encoder retransmit.
Synth Encoder Lines
1696
Same as PNO 1678 2048 1 to 15000000 ALWAYS
Number of lines per revolution to be simulated by the synthetic encoder function. This affects the Z output pulse.
Synth Encoder Speed
1698
Same as PNO 1678 0 0 to 15000000 RPM ALWAYS
Simulated speed to output when the synthetic encoder mode is selected.