Parker AC30 series User Manual

C-46 Parameter Reference
AC30 series Variable Speed Drive
Current Sensor Trip
Parameters::Trips::Current Sensor Trip
This function contains parameters associated to the missing current sensor detection and trip condition
Parameter Name
No.
Path
Default
Range
Units
Writable
Current Diff Level
1658
Parameters::Trips::Current Sensor Trip
25.00 0.00 to 100.00 %
ALWAYS
The percentage of motor rated current which, if exceeded by difference between RMS values of two current sensor measurements,
causes this trip to become active. This trip detects missing, or broken connections in the current sensing circuitry that result in loss of
measurement of one sensor. Enabled in V/Hz mode of operation only.

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485