Parker AC30 series User Manual

6-16 Setup Wizard
AC30 series Variable Speed Inverter
Task selection
Figure 9-4 Task selection
The start page of the PDQ allows you to create and open projects or select a Wizard task for a connected drive
Note: For Wizard tasks no data or settings will be changed in the Drive until the “Commission” page is reached and download is confirmed by the
Engineer. For offline projects a Login button is provided to go online to a connected Drive and make changes.

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485