AC30 Series Product Codes D-3
AC30 series Variable Speed Drive
CONFIGURED AC30 SERIES INVERTER
Note: Not all configurable order codes are available in all territories.
Typical example: 31V-4D004-BE-2S-0000 (as shown in the “Order example” above).
This shows the product is an AC30 series AC line fed Frame D inverter with versatile controller, IP21 standard, rated at 400-480 volts supply,
1.1kW (normal duty), with brake switch fitted, Category C3 EMC filter, with Graphical Keypad fitted, standard 3C3 conformal coating and no
special options.
Note: This product code is for a complete AC30V series drive (includes both control module and power stack).
31
V - 4 D 0004 - B E - 2 S - 0000
31 AC30 series complete AC line fed drive ( n orm a l / he a vy du ty)
34 AC30 series complete DC link fed drive
110 kW / 90 kW
V Standard controller
D Advanced controller with dual encoder system option
A Advanced controller with absolute encoder system option
4 400 V nominal supply system (AC line)
( n orm a l / he a vy du ty)
N
Without brake switch (Frames LMN only)
5.5 kW / 4 kW B Brake switch fitted (Frames D-K only)
N
Nofilterfitted
CategoryC3filterfitted(standard)
Category C2 filter fitted (Frames D-H only)
22 kW / 18.5 kW 1 Blanking cover fitted
30 kW / 22 kW 2 Graphical keypad fitted
S
Standard3C3coating
75 kW / 55 kW 0000 No special options
(1)
1. Only EMC filter option N is valid on 740 products.
(1)
2. Only EMC filter option E is valid on Frame sizes K, L, M & N 710 products.
Frame Size and Current Rating
Frame Size and Current Rating (cont'd)