Parker AC30 series - Web Server Parameter Summary

Ethernet 8-17
AC30 series Variable Speed Inverters
Web Server Parameter Summary
Parameter Name No. Path Default Range Units Writable
Web Access
0944
Setup::Communications::Base
Ethernet Parameters::Base
Comms::Web Server
1:LIMITED
0:DISABLED
1:LIMITED
2:FULL
ALWAYS
Web Server parameter.
Enables access to the inverter web server.
Enumerated values:
0: DISABLED – a web browser is prevented from accessing the inverter web server.
1: LIMITED – a web browser may access a limited set of pages on the inverter web server.
2: FULL -a web browser has full access to the pages on the inverter web server, however
authentication will be required if a password has been set.
Web View Level
0945
Parameters::Base
Comms::Web Server
1:TECHNICIAN
0:OPERATOR
1:TECHNICIAN
2:ENGINEER
ALWAYS
Web Server parameter.
Sets the view level when accessing parameters via the web server.
Enumerated values:
0: OPERATOR
1: TECHNICIAN
2: ENGINEER
Web Password
0946 Parameters::Base
Comms::Web Server
none - ALWAYS
Web Server parameter.
Sets the password for access to restricted inverter web pages such as the Parameters Page. This may
only be changed on the web Services page.