D-2 AC30 Series Product Codes
AC30 series Variable Speed Drive
AC30 SERIES POWER STACK
Typical example: 710-4D0004-BE-0S-0000 (as shown in the “Order example” above).
This shows the product is an AC30 series AC line fed Frame D power stack, IP21 standard, rated at 400-480 volts supply, 1.1kW (normal duty),
with brake switch fitted, Category C3 EMC filter, no Graphical Keypad fitted, standard 3C3 conformal coating and no special options.
Note: This product code is for the power stack only. The control module must be ordered in addition to this (see page D-1).
710 - 4 D 0004 - B E - 0 S - 0000
710
AC Power stack only (no control module) ( norm a l / he a vy duty)
740 DC Power stack only (no control module)
200 kW / 160 kW
4 400 V nominal supply system (AC line)
280 kW / 250 kW
( norm a l / he a vy duty)
N
Without brake switch (Frames LMN only)
11 kW / 7.5 kW B Brake switch fitted (Frames D-K only)
N
Nofilterfitted
CategoryC3filterfitted(s tandard)
Category C2 filter fitted (Frames D-H only)
37 kW / 30 kW 0 No keypad fitted
S
Standard3C3coating
90 kW / 75 kW 0000 No special options
(1)
1. Only EMC filter option N is valid on 740 products.
(1)
2. Only EMC filter option E is valid on Frame sizes K, L, M & N 710 products.
Frame Size and Current Rating
Frame Size and Current Rating (cont'd)