Parker AC30 series User Manual

4-8 The Graphical Keypad
AC30 series Variable Speed Inverter
Trips and other information displays
An information message will be displayed when the unit is tripped. To clear the message from the display, press Soft key 1.
To reset the trip, allowing the inverter to respond to a start command, press the STOP key. See Chapter 10 Trips & Fault Finding.
Setting the display language
The GKP supports multiple languages. The language to be used may be selected as the second entry in the GKP Wizard, (see chapter 9). The
language is also available as a parameter 1005 Language.
When changing language, there may will be a short delay while the updated text is transferred to the GKP. During this period the GKP will be
unresponsive. An information message “UPDATING LANGUAGE” is displayed during this process.
The GKP has the following language files built in as standard:
English
French
German
Spanish
Italian

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485