Parker AC30 series - Page 321

Parameter Reference C-139
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Up and Down Motion - Positive speed
Torque ON
Open Loop
Closed loop
Speed setpoint (2)
Current setpoint (3)
Startup speed
0.75 * Startup speed
Startup current
Startup
time
(5)
Speed input (1)
Ramp (4)
(1) : User speed setpoint
(2) : Internal speed setpoint
(3) ; Internal current setpoint
(4) : ramps are generated based on ramp parameters
(5) : startup procedure : a current is smoothly installed into the motor