Parker AC30 series - Page 323

Parameter Reference C-141
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Torque ON
Open Loop
Closed loop
Speed setpoint
(2)
Current setpoint (3)
Startup speed
0.75 * Startup speed
Startup current
Speed input (1)
Startup current
0.75 * Startup speed
Startup speed
Ramp (4)
Startup
time
(5)
(1) : User speed setpoint
(2) : Internal speed setpoint
(3) ; Internal current setpoint
(4) : ramps are generated based on ramp parameters
(5) : startup procedure : a current is smoothly installed into the motor
(6) : zero crossing for the speed input : the current must be inverted into the motor