Parker AC30 series - Page 395

Parameter Reference C-213
AC30 series Variable Speed Drive
Parameter Name
No.
Path
Default
Range
Units
Writable
Short Overload Level
0346
Parameters::Motor Control::Stack Inv
Time
x. 0 to 200 %
NEVER
Overload value in % of the stack amps for short overload condition(*)
Short Overload Time
0347
Parameters::Motor Control::Stack Inv
Time
0.000 to 10000.000 s
NEVER
Maximum duration under short overload condition (typically 3s)
Inv Time Aiming Point
0348
Parameters::Motor Control::Stack Inv
Time
105.00 0.00 to 125.00 %
ALWAYS
Current in % where the power stack can undertake the load current permanently
Inv Time Output
0349
Parameters::Motor Control::Stack Inv
Time
x. 0 to 600 %
NEVER
Actual output current limit as a % of the stack current
Inv Time Up Rate
0350
Parameters::Motor Control::Stack Inv
Time
5.000 0.000 to 120.000 s
STOPPED
Ramp value to ramp up current when overload condition disappears
Inv Time Down Rate
0351
Parameters::Motor Control::Stack Inv
Time
5.000 0.000 to 120.000 s
STOPPED
Ramp value to reach the aiming point under prolonged overload condition
Inv Time Warning
0352
Parameters::Motor Control::Stack Inv
Time
NEVER
The protection starts to integrate overload conditions