7-16 Trips & Fault Finding
AC30 series Variable Speed Inverter
The data recorded at the instant of the trip is output at the end of the file. This consists of:
• Control module serial number, (parameter 0977 Control Module Serial)
• Time of the trip. This is either the control board age, or the time from the optional Real Time Clock if fitted.
• State of all other trips, active or warning.
• Count of total motor starts, (parameter 1732 Motor Start Count)
• Count of total times the 3-phase has been powered
• For each trip, a count of the total times that trip has been activated.
• A record of near trip events for Over Current, Over Voltage and Under Voltage.
• The product code of the drive, expressed as a number in internal format.
• The IO Option fitted, (parameter 1179 Option IO Fitted)
• The Communications Option fitted, (parameter 0045 Comms Fitted)
• The System board type, (parameter 1740 System Board Fitted)
• The motor control type, (parameter 0511 Motor Type or AFE)
• The control strategy, (parameter 0512 Control Stragegy)
• The control type, (parameter 1533 Control Type)
• The firmware version
• The version of CoDeSys used to create the application.
To Next Page
Loading...
