R&S ZNL Series User Manual

VNA GUI reference
R&S
®
ZNL/ZNLE
321User Manual 1178.5966.02 ─ 20
Remote command:
n.a.
Zoom Select/Stim. Zoom Select
Prepares the analyzer GUI for the selection of a (paraxial) rectangular zoom area.
The effect of the subsequent selection depends on the current zoom mode (as indica-
ted on the button label):
●
In "Mode Graphical Zoom" (button label "Zoom Select"), the selected rectangle is
magnified without modifying any sweep parameters.
●
In "Mode Stimulus Zoom" (button label "Stim. Zoom Select") the selected rectangle
is magnified as well, but at the same time the sweep range of the active channel is
narrowed to the rectangle's horizontal range.
You can define the zoom area using touchscreen or mouse. To modify the zoom win-
dow in graphical zoom mode, you can also use the numerical input fields "Max", "Min",
"Start", and "Stop".
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM[:STATe]
Zoom Reset
If a graphical zoom has been applied to the current diagram, this action resets the
zoom area.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM[:STATe]
Overview On
If a graphical zoom has been applied to the active diagram (and has not been reset,
this button toggles the overview for this diagram.
The overview appears in the upper part of the diagram and shows the original diagram
and the zoom area. You can move the zoomed part of the trace by moving the zoom
area or use the numerical input fields "Max", "Min", "Start", "Stop" to do so.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM[:STATe]
Max / Min / Start / Stop
Defines the coordinates of the graphical zoom window for the active diagram. "Max"
and "Min" define the response axis range, "Start" and "Stop" define the stimulus axis
range.
The input fields are only enabled if a zoom area was selected before.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM:BOTTom
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM:STARt
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM:STOP
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:ZOOM:TOP
Scale softtool

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English