R&S ZNL Series - Page 387

VNA GUI reference
R&S
®
ZNL/ZNLE
387User Manual 1178.5966.02 ─ 20
All buttons on the "Trace Data" tab serve as "openers" for related dialogs:
●
"Import..." calls up a dialog to load a memory trace from a trace file; see Chap-
ter 10.6.11.1, "Import Complex Data dialog", on page 387.
●
The buttons in the "Export snp Files" section call up a dialog to store data or mem-
ory traces to a trace file of the corresponding content and file format; see Chap-
ter 10.6.11.2, "Export Data - <File Type> dialog", on page 388.
●
"snp Free Config..." opens a dialog to define the port assignment for the created
Touchstone (*.s<n>p) file. See Chapter 10.6.11.4, "Select Ports dialog",
on page 393.
10.6.11.1 Import Complex Data dialog
The "Import Complex Data" dialog loads a memory trace from a trace file. Trace files
are ASCII files with selectable file format. The loaded trace data is used to generate a
memory trace which is coupled to the active data trace.
Access: [Trace] > "Trace Data" > "Import..."
Background information
Refer to Chapter 9.4.2, "Trace files", on page 237.
Trace softtool