Getting Started
R&S
®
ZNL/ZNLE
46User Manual 1178.5966.02 ─ 20
8 = "DVI" connector for external display
9 = "LAN" connector
10 = "USB" (3.0) connectors
11 = NRP power sensor connector *)
12 = Headphones connector *)
13 = Aux. Port serving as VNA user port or SA auxiliary port *)
14 = "IF/VIDEO OUT" connector *)
15 = NOISE SOURCE CONTROL *)
*) requires the "Additional Interfaces" option R&S FPL1-B5.
1
3
5 7
6
2
4
Figure 4-4: Rear panel view R&S
ZNLE
1 = AC power supply connection and main power switch
2 = GPIB ("IEC") interface
3 = Reference clock connectors
4 = Trigger input connector
5 = "DVI" connector for external display
6 = "LAN" connector
7 = "USB" (3.0) connectors
The meanings of the labels on the R&S ZNL/ZNLE are described in Chapter 1.2,
"Labels on R&S ZNL/ZNLE", on page 16.
4.2.2.1 AC power supply connection and main power switch
An AC power supply connector and main power switch are located in a unit on the rear
panel of the instrument.
Main power switch function:
Position 1: The instrument is in operation.
Position O: The entire instrument is disconnected from the AC power supply.
Instrument tour
To Next Page
Loading...
