R&S ZNL Series - Page 604

Command reference
R&S
®
ZNL/ZNLE
604User Manual 1178.5966.02 ─ 20
<Day2> ALL | MONDay | TUESday | WEDNesday | THURsday |
FRIDay | SATurday | SUNDay
<Day3> ALL | MONDay | TUESday | WEDNesday | THURsday |
FRIDay | SATurday | SUNDay
<Day4> ALL | MONDay | TUESday | WEDNesday | THURsday |
FRIDay | SATurday | SUNDay
<Day5> ALL | MONDay | TUESday | WEDNesday | THURsday |
FRIDay | SATurday | SUNDay
<Day6> ALL | MONDay | TUESday | WEDNesday | THURsday |
FRIDay | SATurday | SUNDay
<Day7> ALL | MONDay | TUESday | WEDNesday | THURsday |
FRIDay | SATurday | SUNDay
Example: //Schedule a self-alignment every Monday and Friday
CAL:DUE:DAYS MOND,FRID
Example: //Schedule a self-alignment every Sunday at 2 AM after a
warmup period, then shut down instrument.
CAL:DUE:WARM
CAL:DUE:SCH ON
CAL:DUE:DAYS SUND
CAL:DUE:TIME '2:00'
CAL:DUE:SHUT
CALibration:DUE:SCHedule <State>
If enabled, a self-alignment is performed regularly at specific days and time. Specify
the date and time using the CALibration:DUE:DAYS and CALibration:DUE:
TIME commands.
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
*RST: 0
Example: //Schedule a self-alignment every Sunday at 2 AM after a
warmup period, then shut down instrument.
CAL:DUE:WARM
CAL:DUE:SCH ON
CAL:DUE:DAYS SUND
CAL:DUE:TIME '2:00'
CAL:DUE:SHUT
Common instrument commands