R&S ZNL Series User Manual

Command reference
R&S
®
ZNL/ZNLE
618User Manual 1178.5966.02 ─ 20
Remote commands exclusive to obtaining system information:
DIAGnostic:SERVice:BATTery:LEVel?..............................................................................618
DIAGnostic:SERVice:BIOSinfo?...................................................................................... 618
DIAGnostic:SERVice:HWINfo?........................................................................................ 618
DIAGnostic:SERVice:VERSinfo?..................................................................................... 619
SYSTem:ERRor:CLEar:ALL............................................................................................ 619
SYSTem:ERRor:CLEar:REMote...................................................................................... 619
SYSTem:ERRor:LIST?................................................................................................... 619
SYSTem:ERRor[:NEXT]?................................................................................................620
SYSTem:FIRMware:UPDate............................................................................................620
SYSTem:FORMat:IDENt.................................................................................................620
SYSTem:PRESet:COMPatible.........................................................................................621
DIAGnostic:SERVice:BATTery:LEVel?
Queries the joint charge state of the internal batteries (with internal battery pack option
R&S FPL1-B31).
Internal LiiIon batteries are not available for R&S ZNLE.
Return values:
<ChargeState> numeric value
Charge state in percent
Range: 0 to 100
Example:
DIAG:SERV:BATT:LEV?
Usage: Query only
DIAGnostic:SERVice:BIOSinfo?
This command queries the BIOS version of the CPU board.
Return values:
<BiosInformation> String containing the BIOS version.
Example:
DIAG:SERV:BIOS?
Returns the BIOS version.
Usage: Query only
DIAGnostic:SERVice:HWINfo?
This command queries hardware information.
Return values:
<Hardware> String containing the following information for every hardware
component.
<component>: name of the hardware component
<serial#>: serial number of the component
<order#>: order number of the component
<model>: model of the component
Common instrument commands

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English