R&S ZNL Series - Page 870

Command reference
R&S
®
ZNL/ZNLE
870User Manual 1178.5966.02 ─ 20
Parameters:
<Boolean>
MMEMory:STORe:TRACe:OPTion:COMMent <Comment>
Defines a comment to be added to (the comment section of) exported trace files.
This is a global setting, i.e. the comment string is used for each trace export in every
open channel setup.
Parameters:
<Comment> Comment string. If empty, no comment will be added.
Manual operation: See "Comment Added to File" on page 392
MMEMory:STORe:TRACe:OPTion:PLUS <arg0>
This command defines how positive numbers are prefixed during Touchstone file
export: by a leading space, a plus sign or not at all.
Parameters:
<arg0> SPACe | PLUS | VOID
Manual operation: See "Positive Number Prefix" on page 144
MMEMory:STORe:TRACe:OPTion:SSEParator <Boolean>
This command defines whitespace insertion during Touchstone file export.
If set to ON, separator lines are skipped, i.e. the content parts are no longer separated
by blank lines.
Parameters:
<Boolean>
Manual operation: See "Skip Separator Lines" on page 144
MMEMory:STORe:TRACe:OPTion:TABS <Boolean>
This command defines whitespace insertion during Touchstone file export.
If set to ON, columns are separated by tabs rather than spaces.
Parameters:
<Boolean>
Manual operation: See "Use TAB (instead of blanks)" on page 144
MMEMory:STORe:TRACe:OPTion:TRIM <Boolean>
This command defines whitespace insertion during Touchstone file export.
If set to ON, whitespace at the beginning of each line is removed.
VNA command reference