R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT GUI Reference
File Menu
Operating Manual 1145.1084.12 – 30 96
Move
Displays a four-headed arrow to move the active window with the arrow keys or with the mouse.
This command is unavailable for maximized windows.
Size
Displays a four-headed arrow to change the size of the active window using the arrow keys or the mouse.
Minimize
Reduces the active window to an icon.
You can also configure the NWA application to be started with a minimized window; see Startup
Procedure.
Maximize
Enlarges the active window to fill the available space.
Close
Closes the active setup window (setup control menu) or ends the analyzer session (application control
menu).
In a setup window the analyzer suggests to save changes to the setup before closing it. If a setup
is closed without saving, all changes made since the last time it was saved are lost.
In the application window the analyzer prompts you to save setups with unsaved changes.
The Close application command is equivalent to the Exit command in the File menu. Moreover Close
is the same as double-clicking a Control menu icon or clicking the icon in the title bar of the active
window.
Next
Selects the next diagram area as the active diagram area. This command is available in setup control
menus only and is disabled if only one setup is defined.
File Menu
The File menu provides standard Windows™ functions to create, save, recall or print setups, to copy the
current screen and to shut down the application.
To Next Page
Loading...
