R&S ZVB - Display

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 735
SCPI,
Command
Types
Device-specific, command or query.
Example:
DIAG:DEV:STAT 'report_16112010_1120'
Generate a report and store it to C:\Program
Files\Rohde&Schwarz\Network
Analyzer\Report\report_16112010_1120.zip. Use the MMEMory...
commands to rename, move, or delete the file.
DIAGnostic:SERVice:FUNCtion <SFId1>, <SFId2> ...
[Deprecated command, replaced by DIAGnostic:SERVice:SFUNction]
DIAGnostic:SERVice:SFUNction '<SFIdentifier>'
Activates a service function (mainly for internal use). Service functions are identified by groups of
numbers, separated by dots.
 DIAGnostic:SERVice:SFUNction requires the service function identifier (including the dots) in
single or double quotes (string parameter). This is analogous to manual entry of the identifier in
the Service Function dialog.
 DIAGnostic:SERVice:FUNCtion requires the service function identifier as a (pseudo-)numeric
value, the dots being replaced by commas. No quotation marks are needed. Five groups of
numbers are allowed at maximum.
DIAGnostic:SERVice:RFPower <Boolean>
Turns the internal source power at all ports and the power of all external generators on or off. This
command is equivalent to OUTPut<Ch>[:STATe].
<Boolean>
ON | OFF - Switches the power on or off.
*RST value
ON
SCPI, Command Types
Device-specific, command or query
Example:
DIAG:SERV:RFP OFF
Turn off the RF source power.
DISPlay...
This subsystem controls the selection and presentation of graphical and trace information on the screen.
Note: Traces are generally identified by a string parameter defining the trace name (e.g.
CALCulate<Ch>:PARameter:SELect <Trace_Name>). In the DISPlay... subsystem, traces are