R&S ZVB - Close; Cascade; Tile; Maximize

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT GUI Reference
Window Menu
Operating Manual 1145.1084.12 – 30 573
This command is equivalent to File – New. To open an existing setup, select File – Open / Recall. To
rename a setup, use File – Save As.
Remote control:
MEMory:DEFine "<setup_name>"
Close
Closes an opened setup window. The analyzer suggests to save changes to the setup before closing it. If
a setup is closed without saving, all changes made since the last time it was saved are lost.
This command is equivalent to File – Close.
Remote control:
MEMory:DELete[:NAME] "<setup_name>"
Cascade
Arranges all opened windows in an overlapped fashion, showing each one's title bar. The active window is
placed in the foreground.
Remote control:
None (screen configuration only)
Tile
Arranges all opened windows in non-overlapped tiles.
Remote control:
None (screen configuration only)
Maximize
Maximizes the active setup window to occupy the whole screen.
Remote control:
None (screen configuration only)
1 Set<n>.zvx
Displays a list of currently open setup windows. A checkmark appears in front of the setup name of the
active window. Selecting a setup from this list makes its window active and places it in the foreground.
Remote control:
MEMory:CAT?