R&S ZVB - Preface; 1.1 New Features in this Revision; 1.2 R&S ZVA;ZVB;ZVT Documentation Map

Preface
R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT
3Operating Manual 1145.1084.12 ─ 30
1 Preface
This Operating Manual describes the functionality of the R&S ZVA/ZVB/ZVT vector
network analyzers and provides examples and reference information for manual and
remote control. The Operating Manual complements the Getting Started guide; the
complete information is contained in the analyzer's help system.
For the following chapters please refer to the Getting Started guides for models
R&S ZVA, R&S ZVB, and R&S ZVT:
●
Chapter 1: Preparing the Analyzer for Use
●
Chapter 2: Getting Started
This Operating Manual contains the following chapters:
●
Chapter 1: Preface
●
Chapter 2: Glossary: Frequently Used Terms
●
Chapter 3: System Overview
●
Chapter 4: Measurement Examples
●
Chapter 5: GUI Reference
●
Chapter 6: Remote Control
●
Chapter 7: Command Reference
●
Chapter 8: Programming Examples
●
Chapter 9: Annexes (Maintenance, Hardware Interfaces)
1.1 New Features in this Revision
This manual describes version V3.90 and higher of the R&S ZVA/ZVB/ZVT firmware.
Compared to previous versions, the new firmware provides numerous extensions and
improvements. The history of the firmware depends on your analyzer type, it is docu-
mented at the beginning of the help system, section Welcome – What’s New?.
To check your vector network analyzer firmware version, click Help – About NWA...
1.2 R&S ZVA/ZVB/ZVT Documentation Map
The R&S ZVA/ZVB/ZVT documentation is delivered as a help system, a printed Get-
ting Started guide and on CD-ROM.
R&S ZVA/ZVB/ZVT Documentation Map