R&S ZVB - Page 779

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 764
Example:
*RST; :MEM:DEF 'SETUP_2'
Create a setup named 'Setup_2' and make it the active
setup.
MEM:CAT?
Query all setups. The response is 'Set1,Setup_2'.
MMEM:STOR:STAT 1, 'C:\Program Files\Rohde&Schwarz\Network
Analyzer\RecallSets\Setup_2.zvx'; :MEM:DEL 'Setup_2.zvx'
Store the active setup Setup_2 to a file, renaming it Setup_2.zvx. Close the
setup.
MEMory:DEFine '<setup_name>'
Creates a new setup <setup_name> using default settings for the traces, channels and diagram areas.
The created setup becomes the active setup.
'<setup_name>'
String parameter to specify the name of the created setup.
*RST value
–
SCPI, Command Types
Device-specific, no query.
Example:
See MEM:CAT?.
MEMory:DELete[:NAME] '<file_name>'
Closes the specified setup.
'<setup_name>'
String parameter to specify the name of the setup to be closed.
*RST value
–
SCPI, Command Types
Confirmed, no query.
Example:
See MEM:CAT?.
MEMory:SELect '<setup_name>'
Selects <setup_name> as the active setup or returns the name of the active setup.
'<setup_name>'
String parameter to specify the setup.
*RST value
–
SCPI, Command
Types
Confirmed, command or query (without parameter, returns the active setup).
Example:
*RST; :MEM:DEF 'SETUP_2'
Create a setup named 'Setup_2' and make it the active