R&S ZVB - Page 1111

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Programming Examples
Basic Tasks
Operating Manual 1145.1084.12 – 30 1096
CALCulate1:LIMit:DISPlay:STATe ON
CALCulate1:LIMit:STATe ON; FAIL? // if the trace is failed; the response is 1.
//
// Check the result on the local screen
// Go to local
SYSTem:DISPlay:UPDate ONCE
//
// Check the result in the Define Limit Line dialog
// The Define Limit Line dialog gives an overview of the limit line segments of the active trace.
DISPlay:MENU:KEY:EXECute 'Define Limit Line'