R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT GUI Reference
Channel Menu
Operating Manual 1145.1084.12 – 30 351
Intermodulation measurement with frequency conversion
The intermodulation distortion measurement can be extended to frequency-converting DUTs. E.g. it is
possible to feed the two-tone source signal to the RF input of a mixer and measure the intermodulation
distortion of the IF output signal, after conversion with an additional LO signal.
The Define Mixer Measurement dialog can be accessed from the intermodulation distortion measurement
dialog to set up such a scalar mixer measurement.
The intermodulation distortion measurement may not work properly if arbitrary frequency converting
To Next Page
Loading...
