R&S ZVB - Page 739

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 724
CONFigure:TRACe<Trc>:CHANnel:NAME? '<Trc_name>'
Queries the channel name for an existing trace named '<Trc_name>'.
<Trc>
Trace number. This suffix is ignored; the trace is referenced by its name.
'<Trc_name>'
Trace name, e.g. 'Ch2Trc2'.
*RST value
– (a trace name must be specified whenever the query is used)
SCPI, Command Types
Device-specific, query only.
Example:
See CONFigure:TRACe<Trc>:CATalog?
CONFigure:TRACe<Trc>:CHANnel:NAME:ID? '<Trc_name>'
Queries the channel number (numeric suffix) for an existing trace named '<Trc_name>'.
<Trc>
Trace number. This suffix is ignored; the trace is referenced by its name.
'<Trc_name>'
Trace name, e.g. 'Ch2Trc2'.
*RST value
– (a trace name must be specified whenever the query is used)
SCPI, Command Types
Device-specific, query only.
Example:
See CONFigure:TRACe<Trc>:CATalog?
CONFigure:TRACe<Trc>:NAME '<Trc_name>'
Assigns a name to an existing trace number <Trc>. Note that it is not possible to assign the same name to
two different traces. CONFigure:TRACe<Trc>:CATalog? returns a list of all traces in the active setup
with their names.
<Trc>
Number of an existing trace.
'<Trc_name>'
Trace name, e.g. 'Ch2Trc2'.
*RST value
'Trc1'
SCPI, Command Types
Device-specific, command or query.
Example:
See CONFigure:TRACe<Trc>:CATalog?
CONFigure:TRACe<Trc>:NAME:ID? '<Trc_name>'
Queries the trace number (numeric suffix) of a trace with known trace name.
CONFigure:TRACe<Trc>:CATalog? returns a list of all traces in the active setup with their names.
<Trc>
Trace number. This suffix is not relevant and may be omitted (the command