R&S ZVB - Page 781

R&S
®
ZVA / R&S
®
ZVB / R&S
®
ZVT Command Reference
SCPI Command Reference
Operating Manual 1145.1084.12 – 30 766
Convert and copy the factory calibration data of the
active calibration unit to the specified directory.
MMEMory:AKAL:USER:CONVersion '<directory_name>'[,'<file_name>']
Converts an arbitrary (e.g. user-defined) set of calibration data of the standards in the active calibration
unit (SYSTem:COMMunicate:RDEVice:AKAL:ADDRess) to Touchstone format and copies it to the
specified directory.
'<directory_name>'
String parameter to specify the directory.
*RST value
–
'<file_name>'
Name and (possibly) directory of the cal kit file to be used for the automatic
calibration (optional string parameter):
 If the parameter is omitted, the analyzer uses the last characterized
cal kit file.
 If an empty string (' ') is specified, the factory cal kit file stored in the
active calibration unit
(SYSTem:COMMunicate:RDEVice:AKAL:ADDRess) is used. By
default this file is also used in manual control.
 A NWA cal kit file name *.calkit without path denotes a specific cal kit
file stored in the active calibration unit.
 A NWA cal kit file name *.calkit with path denotes a specific cal kit file
stored in an arbitrary directory.
SCPI, Command
Types
Device-specific, no query.
Example:
MMEM:AKAL:USER:CONV 'C:\AKAL\Touchstone'
Convert and copy the calibration data of the standards of
the last characterized cal kit to the specified
directory.
MMEM:AKAL:USER:CONV 'C:\AKAL\Touchstone', 'user.calkit'
Convert and copy the calibration data of the standards of
the user-defined cal kit 'user.calkit' to the specified
directory.
MMEMory:CATalog? [<directory_name>]
Returns the contents of the current or of a specified directory.
Use MMEMory:CATalog:ALL? to query the contents of the current directory and all subdirectories.
'<directory_name>'
String parameter to specify the directory. If the directory is omitted, the
command queries the contents of the current directory, to be queried with
MMEMory:CDIRectory?