Instrument Functions
R&S
®
FSVA/FSV
353Operating Manual 1176.7510.02 ─ 09
The file consists of the header containing important scaling parameters and a data sec-
tion containing the marker data. For details on an ASCII file see Chapter 3.2.8.7,
"ASCII File Export Format", on page 266.
This format can be processed by spreadsheet calculation programs, e.g. MS-Excel. It
is necessary to define ';' as a separator for the data import. Different language versions
of evaluation programs may require a different handling of the decimal point. It is there-
fore possible to select between separators '.' (decimal point) and ',' (comma) using the
"Decim Sep" softkey (see "Decim Sep" on page 200).
An example of an output file for Spectrum Emission Mask measurements is given in
"ASCII File Export Format (Spectrum Emission Mask)" on page 369.
Remote command:
FORMat:DEXPort:DSEParator on page 755
MMEMory:STORe<n>:LIST on page 770
Decim Sep ← Save Evaluation List ← List Evaluation ← Spectrum Emission
Mask
Selects the decimal separator with floating-point numerals for the ASCII Trace export
to support evaluation programs (e.g. MS-Excel) in different languages. The values '.'
(decimal point) and ',' (comma) can be set.
Remote command:
FORMat:DEXPort:DSEParator on page 755
Edit Reference Range ← Spectrum Emission Mask
Opens the "Reference Range" dialog box to edit the additional settings used for SEM
measurements.
Two different power reference types are supported:
●
"Peak Power"
Measures the highest peak within the reference range.
●
"Channel Power"
Measures the channel power within the reference range (integral bandwidth
method).
If the "Channel Power" reference power type is activated, the dialog box is exten-
ded to define additional settings:
Measurement Functions
To Next Page
Loading...
