Instrument Functions
R&S
®
FSVA/FSV
529Operating Manual 1176.7510.02 ─ 09
New Table ← Conversion Loss Table Setup ← External Mixer Config ← External
Mixer
Opens the "Edit Conversion Loss Table" dialog box to configure a new conversion loss
table.
A preview pane displays the current configuration of the conversion loss function as
described by the Position/Value entries.
Remote command:
[SENSe:]CORRection:CVL:SELect on page 787
File Name ← New Table ← Conversion Loss Table Setup ← External Mixer Con-
fig ← External Mixer
Defines the name under which the table is stored in the C:\r_s\instr\user\cvl\
directory on the instrument. The name of the table is identical with the name of the file
(without extension) in which the table is stored. The entry in this field is mandatory.
The .ACL extension is automatically appended during storage.
Remote command:
[SENSe:]CORRection:CVL:SELect on page 787
Comment ← New Table ← Conversion Loss Table Setup ← External Mixer Con-
fig ← External Mixer
An optional comment that describes the conversion loss table. The comment can be
freely defined by the user.
Remote command:
[SENSe:]CORRection:CVL:COMMent on page 789
Band ← New Table ← Conversion Loss Table Setup ← External Mixer Config ←
External Mixer
The waveguide or user-defined band for which the table is to be applied.
For a definition of the frequency range for the pre-defined bands, see Table 3-22).
Instrument Functions – External Mixer (Option R&S
FSV-B21)
To Next Page
Loading...
