Remote Control
R&S
®
FSVA/FSV
609Operating Manual 1176.7510.02 ─ 09
Query parameters:
<Format> LEGacy | NEW
LEGacy
"Rohde&Schwarz,<device type>,<serial number>/
<model>,<firmware version>"
NEW
"Rohde&Schwarz,<device type>,<part number>/<serial num-
ber>,<firmware version>"
Example: Legacy format:
Rohde&Schwarz,R&S FSV-7,101768/007,1.05
New format:
Rohde&Schwarz,R&S
FSV-7,1307.9002K07/101768,1.05
Usage: Query only
Manual operation: See "*IDN Format Leg./New" on page 184
See "Versions+Options" on page 190
*IST?
Individual status query
Returns the contents of the IST flag in decimal form. The IST flag is the status bit
which is sent during a parallel poll.
Return values:
<ISTflag> 0 | 1
Usage: Query only
*OPC
Operation complete
Sets bit 0 in the event status register when all preceding commands have been execu-
ted. This bit can be used to initiate a service request. The query form writes a "1" into
the output buffer as soon as all preceding commands have been executed. This is
used for command synchronization.
*OPT?
Option identification query
Queries the options included in the instrument. For a list of all available options and
their description refer to the data sheet.
Remote Control – Commands
To Next Page
Loading...
