Rohde & Schwarz FSVA - Page 818

Remote Control
R&S
®
FSVA/FSV
818Operating Manual 1176.7510.02 ─ 09
Parameters:
<Frequency> see rules in chapter 4, "Ranges and settings"
*RST: -2.52 MHz (range 1), 2.52 MHz (range 2), 250.0
MHz (range 3)
Example:
LIST:RANG3:STOP 10000000
Sets the stop frequency for range 2 to 10 MHz.
Manual operation: See "Range Start / Range Stop" on page 378
[SENSe:]LIST:RANGe<range>:FILTer:TYPE
<Type>
This command sets the filter type for the specified range.
Suffix:
<range>
.
1...20
range
Parameters:
<Type> NORMal
Gaussian filters
CFILter
channel filters
RRC
RRC filters
PULSe
EMI (6dB) filters
P5
5 Pole filters
*RST: NORM
The available bandwidths of the filters are specified in the data
sheet.
Example:
LIST:RANG1:FILT:TYPE RRC
Sets the RRC filter type for range 1.
Manual operation: See "Filter Type" on page 378
[SENSe:]LIST:RANGe<range>:INPut:ATTenuation <Value>
This command sets the attenuation for the specified range.
Suffix:
<range>
.
1...20
range
Parameters:
<Value> Refer to the data sheet.
*RST: 0 dB
Example:
LIST:RANG3:INP:ATT 10
Sets the attenuation of range 3 to 10 dB.
Remote Control – Commands