Rohde & Schwarz FSVA - Page 821

Remote Control
R&S
®
FSVA/FSV
821Operating Manual 1176.7510.02 ─ 09
Parameters:
<Value> For details on possible values refer to chapter 4, Sweep Points
softkey of the "Sweep" menu.
*RST: 691
Example:
LIST:RANG3:POIN 601
Sets 601 sweep points for range 3.
Manual operation: See "Sweep Points" on page 380
[SENSe:]LIST:RANGe<range>:RLEVel
<Value>
This command sets the reference level for the specified range.
Suffix:
<range>
.
1...20
range
Parameters:
<Value> Refer to the data sheet.
*RST: -20 dBm
Example:
LIST:RANG2:RLEV 0
Sets the reference level of range 2 to 0 dBm.
Manual operation: See "Ref. Level" on page 379
[SENSe:]LIST:RANGe<range>:SWEep:TIME
This command sets the sweep time for the specified range.
Suffix:
<range>
.
1...20
range
Parameters:
<SweepTime> Allowed values depend on the ratio of span to RBW and RBW to
VBW. For details refer to the data sheet.
*RST: 0.27 s
Example:
LIST:RANG1:SWE:TIME 1
Sets the sweep time for range 1 to 1 s.
Manual operation: See "Sweep Time" on page 379
[SENSe:]LIST:RANGe<range>:SWEep:TIME:AUTO
This command activates or deactivates the automatic sweep time setting for the speci-
fied range.
Suffix:
<range>
.
1...20
range
Remote Control – Commands