Rohde & Schwarz FSVA - Page 850

Remote Control
R&S
®
FSVA/FSV
850Operating Manual 1176.7510.02 ─ 09
Manual operation: See "Spacing" on page 328
[SENSe:]POWer:ACHannel:SPACing:CHANnel<channel> <Spacing>
This command defines the channel spacing for the carrier signals.
Suffix:
<channel>
.
1...11
the TX channel
Parameters:
<Spacing> 14 kHz to 20 GHz
*RST: 20 kHz
Example:
POW:ACH:SPAC:CHAN 25kHz
Manual operation: See "Spacing" on page 328
[SENSe:]POWer:ACHannel:TXCHannel:COUNt <Number>
This command selects the number of carrier signals.
The command is available only for multicarrier channel and adjacent-channel power
measurements with span > 0 (see CALCulate<n>:MARKer<m>:FUNCtion:POWer:
SELect on page 703).
Parameters:
<Number> 1 to 18
*RST: 1
Example:
POW:ACH:TXCH:COUN 3
Manual operation: See "# of TX Chan" on page 325
[SENSe:]POWer:BANDwidth|BWIDth <Percentage>
This command defines the percentage of the power with respect to the total power.
This value is the basis for the occupied bandwidth measurement (see [SENSe:
]POWer:ACHannel:PRESet on page 847).
Parameters:
<Percentage> 10 to 99.9PCT
*RST: 99PCT
Example:
POW:BWID 95PCT
Manual operation: See "% Power Bandwidth (span > 0)" on page 343
Remote Control – Commands