Safety and regulatory information
R&S
®
SMB100B
18User Manual 1178.3711.02 ─ 08
2 Safety and regulatory information
The product documentation helps you use the product safely and efficiently. Follow the
instructions provided here and in the following chapters.
Intended use
The product generates radio frequency (RF) signals for the development, production
and verification of electronic components, modules or devices. The product is intended
for industrial use, for example for production and conformance testing, maintenance
and engineering laboratories.
Use the product only for its designated purpose. Any other use is considered improper
use. Observe the operating conditions and performance limits stated in the data sheet.
Target audience
This document targets at all users, including technicians, operators, administrators and
maintenance personnel. The required skills and experience of the users depend on the
test setup and application of the product.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential dan-
gers and gives instructions on how to prevent personal injury or damage caused by
dangerous situations. Safety information is provided as follows:
●
In Chapter 2.1, "Safety instructions", on page 18. The same information is provi-
ded in many languages as printed "Safety Instructions". The printed "Safety
Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you need to
take care during setup or operation.
2.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured according
to the highest technical standards. To use the products safely, follow the instructions
provided here and in the product documentation. Keep the product documentation
nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Intended
use and limits are described in the product documentation such as the data sheet,
manuals and the printed "Safety Instructions". If you are unsure about the appropriate
use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users also
need sound knowledge of at least one of the languages in which the user interfaces
and the product documentation are available.
Reconfigure or adjust the product only as described in the product documentation or
the data sheet. Any other modifications can affect safety and are not permitted.
Safety instructions
To Next Page
Loading...
