Rohde & Schwarz R&S SMB100B - Import;Export List Files

Improving level performance
R&S
®
SMB100B
166User Manual 1178.3711.02 ─ 08
"UCOR Refer-
ence Level"
Displays the reference value for user correction.
The user correction reference level is the set Amplitude plus the set
Offset.
Remote command:
[:SOURce<hw>]:POWer[:LEVel][:IMMediate]:REFLevel
on page 499
7.3.4 Import/export list files
Access:
1. Select one of the following:
● "Sweep" > "List mode".
● "Level" > "User Correction".
● "Modulation > Pulse Modulation > Pulse Generator > Pulse Mode = Train".
2. Select "Import/Export".
Figure 7-3: Im-/Export dialog (example with UCOR settings)
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode........................................................................................................................... 166
ASCII File Settings......................................................................................................167
Select (ASCII) Source/Select (ASCII) Destination...................................................... 167
Select Source/Select ASCII Destination..................................................................... 167
Import / Export.............................................................................................................168
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
User correction