Rohde & Schwarz R&S SMB100B - Import;Export Settings

List and sweep mode
R&S
®
SMB100B
142User Manual 1178.3711.02 ─ 08
Settings
List Mode Data............................................................................................................142
Edit List Mode Data.....................................................................................................142
List Range from/to.......................................................................................................142
List Mode Data
Accesses the standard "Select List" dialog for selecting, creating and editing a list file.
The currently loaded file is indicated.
You can create data lists with the internal editor or import externally created files, see
"Creating and handling lists" on page 126.
Remote command:
[:SOURce<hw>]:LIST:CATalog? on page 483
[:SOURce<hw>]:LIST:SELect on page 484
[:SOURce<hw>]:LIST:DELete on page 483
[:SOURce<hw>]:LIST:DELete:ALL on page 483
Edit List Mode Data
Opens the editor to insert and save data lists with RF frequency, power and dwell time
values, see Chapter 6.7, "List editor", on page 145.
You find this function also in standard file select dialog, accessed via List Mode Data.
List Range from/to
Defines an index range in the current list by setting the start and stop index.
The instrument generates the signal with the values of the selected index range and
ignores all other list entries.
Remote command:
[:SOURce<hw>]:LIST:INDex:STARt on page 480
[:SOURce<hw>]:LIST:INDex:STOP on page 480
6.6.3 Import/export settings
Access:
1. Select "Sweep" > "List Mode".
List mode settings