Rohde & Schwarz R&S SMB100B - List Mode Data Exchange

Remote control commands
R&S
®
SMB100B
485User Manual 1178.3711.02 ─ 08
Parameters:
<Filename> string
Filename or complete file path; file extension can be omitted.
Example: See Example"Create an RF list and activate the list mode"
on page 474.
Manual operation: See "List Mode Data" on page 142
See "Functions for handling of data lists" on page 208
12.15.6.3 List mode data exchange
With the following commands, you can configure lists in ASCII format and export or
import them accordingly.
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?.......................................................... 485
[:SOURce<hw>]:LIST:DEXChange:EXECute.................................................................... 485
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension.........................................................486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect..............................................................486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn........................................... 486
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal........................................... 486
[:SOURce<hw>]:LIST:DEXChange:MODE........................................................................487
[:SOURce<hw>]:LIST:DEXChange:SELect....................................................................... 487
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog?
Queries the available ASCII files for export or import of list mode data in the current or
specified directory.
Return values:
<Catalog> string
List of ASCII files *.txt or *.csv, separated by commas.
Example: See Example"List mode data exchange" on page 476.
Usage: Query only
Manual operation: See "Select (ASCII) Source/Select (ASCII) Destination"
on page 96
[:SOURce<hw>]:LIST:DEXChange:EXECute
Executes the import or export of the selected list file, according to the previously set
transfer direction with command [:SOURce<hw>]:LIST:DEXChange:MODE
Example:
See Example"List mode data exchange" on page 476.
Usage: Event
Manual operation: See "Import / Export" on page 96
SOURce subsystem