Rohde & Schwarz R&S SMB100B - Source:roscillator Subsystem

Remote control commands
R&S
®
SMB100B
500User Manual 1178.3711.02 ─ 08
Example:
SOURce1:POWer:RANGe:UPPer?
// -15
SOURce1:POWer:RANGe:LOW?
// -50
Usage: Query only
Manual operation: See "Level Range" on page 66
[:SOURce]:POWer:WIGNore <State>
Ignores level range warnings.
Parameters:
<State> 1 | ON | 0 | OFF
*RST: n.a. (factory preset: 0)
Example:
SOURce:POWer:WIGNore 1
12.15.11 SOURce:ROSCillator subsystem
The SOURce:ROSCillator subsystem contains the commands for setting the exter-
nal and internal reference frequency.
The commands of this subsystem are not affected by an instrument reset (*RST
on page 354).
SOURce subsystem