Rohde & Schwarz R&S SMB100B - Accessing the R&S SMB100 B File System Using SMB (Samba)

File and data management
R&S
®
SMB100B
218User Manual 1178.3711.02 ─ 08
We recommend that you change this password in the "Setup > Security > Pass-
word Management > Change User Password" dialog before connecting the instru-
ment to the network.
See Chapter 10.4.4, "Password management", on page 258.
5. Enter the password to access the user directory.
The user directory corresponds to the /var/user/ directory of the instrument.
There, you can perform standard functions like creating directory, or saving files.
6. In the user directory, create a directory, e.g. test ftp.
7. Select "System Config > Save/Recall".
Open the /var/user/ directory.
The dialog displays the /var/user/test ftp directory.
9.9.3 Accessing the R&S SMB100B file system using SMB (Samba)
The SMB (Samba) protocol is an alternative way to access the file system of the instru-
ment from a remote PC. This protocol works if both the instrument and the PC are con-
nected to a LAN.
How to: see Chapter 3.1.7, "Connecting to LAN", on page 27.
How to transfer files from and to the instrument