Rohde & Schwarz R&S SMB100B - Calibration Subsystem

Remote control commands
R&S
®
SMB100B
367User Manual 1178.3711.02 ─ 08
Setting parameters:
<savrcl_state_nr> Corresponds to the specific <number> defined with the *SAV
command, e.g. *SAV 4.
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Usage: Event
Manual operation: See "Save" on page 204
:MEMory:HFRee?
Returns the used and available memory in Kb.
Return values:
<TotalPhysMemKb> integer
Total physical memory.
<ApplicMemKb> integer
Application memory.
<HeapUsedKb> integer
Used heap memory.
<HeapAvailableKb> integer
Available heap memory.
Usage: Query only
12.6 CALibration subsystem
The CALibration subsystem contains the commands needed for performing internal
adjustments. This procedure is triggered by the query commands.
Common suffixes
The following common suffixes are used in the remote commands:
Suffix Value range Description
CALibration<hw>
[1] Optional suffix
Understanding the query response
●
0: error-free execution of the adjustments
●
1: indicates that an error occurred; the process has been canceled
:CALibration:ALL[:MEASure]?......................................................................................... 368
:CALibration<hw>:ALL:DATE?.........................................................................................368
:CALibration<hw>:ALL:INFormation?............................................................................... 368
:CALibration<hw>:ALL:TEMP?........................................................................................ 369
CALibration subsystem