Network operation and remote control
R&S
®
SMB100B
306User Manual 1178.3711.02 ─ 08
Delete
Deletes the selected device tag from the HUMS history.
Remote command:
DIAGnostic:HUMS:TAGS:DELete on page 377
Add
Adds a new device tag to the HUMS service.
Remote command:
DIAGnostic:HUMS:TAGS[:VALue] on page 378
DIAGnostic:HUMS:TAGS:ALL? on page 377
Delete All
Removes all device tags from the HUMS history.
Remote command:
DIAGnostic:HUMS:TAGS:DELete:ALL on page 378
11.5.9 QR code
Access:
► Select "System Config > Remote Access > QR Code".
The "QR Code" dialog shows the current instrument address (IP address) in quick
response (QR) format.
This functionality provides fast access to the instrument via VNC with, for example, a
smartphone or a tablet.
Remote access settings
To Next Page
Loading...
