Rohde & Schwarz R&S SMB100B - Password Management

General instrument functions
R&S
®
SMB100B
258User Manual 1178.3711.02 ─ 08
Security Password
Enters the password that is required to enable or to disable the settings protected by a
security password. Default is 123456.
How to:
●
"Disabling the LAN interface" on page 261
●
"Disabling LAN services" on page 262
●
"Changing the default security password" on page 261.
Accept
Applies the modified settings, provided the security password is entered and correct.
10.4.4 Password management
Access:
1. Select "System Config > Setup > Security > Security > Password Management >
User Password".
In this tab, you can assign the security and a user-defined password.
2. Select "System Config > Setup > Security > Security > Password Management >
Security Password".
Using the security settings