Rohde & Schwarz R&S SMB100B - Hard Copy Settings

Remote control commands
R&S
®
SMB100B
389User Manual 1178.3711.02 ─ 08
// Execute and transfer the hard copy
// ******************************************************************
:HCOPy:EXECute
:HCOPy:DATA
// generates a hard copy
// transfers the hard copy to the remote client
:HCOPy:FILE:AUTO:FILE?
// queries the automatic file name
// "hardcopy1607001.bmp"
:HCOPy:FILE:AUTO:NUMBer?
// queries the number in the automatic file name
// "001"
:HCOPy:FILE:AUTO?
// queries the path and file name of the automatically generated file
// "/usb/HCopy/hardcopy1607001.bmp"
12.11.1 Hard copy settings
With the following commands, you can configure the settings of a hard copy.
:HCOPy:DATA?..............................................................................................................389
:HCOPy:IMAGe:FORMat................................................................................................ 389
:HCOPy:DEVice:LANGuage............................................................................................389
:HCOPy:REGion............................................................................................................ 390
:HCOPy:FILE[:NAME].....................................................................................................390
:HCOPy[:EXECute]........................................................................................................ 390
:HCOPy:DATA?
Transfers the hard copy data directly as a NByte stream to the remote client.
Return values:
<Data> block data
Example: See Example"Store a hard copy of the display" on page 388
Usage: Query only
:HCOPy:IMAGe:FORMat <Format>
:HCOPy:DEVice:LANGuage <Language>
Selects the graphic format for the hard copy. You can use both commands alterna-
tively.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST: PNG
Example: See Example"Store a hard copy of the display" on page 388
Manual operation: See "Format" on page 223
HCOPy subsystem