Rohde & Schwarz R&S SMB100B - Closed Connections

Network operation and remote control
R&S
®
SMB100B
295User Manual 1178.3711.02 ─ 08
The "Active " tab shows the currently active remote connections, and you can
enable the display of the active connections in the task bar.
Settings
Show Remote Connections in Taskbar....................................................................... 295
SCPI Connections.......................................................................................................295
TCP/IP Connections....................................................................................................295
Show Remote Connections in Taskbar
Displays the currently active connections in the taskbar.
SCPI Connections
Displays the VISA resources strings of the remote connections currently controlling the
instrument via the LAN interface.
Remote command:
n.a.
TCP/IP Connections
Displays the types and client addresses of the remote connections currently controlling
the instrument via the LAN interface.
Remote command:
n.a.
11.5.6.2 Closed connections
Access:
► Select "System Config > Remote Access > Remote Connections > Closed".
Remote access settings