Rohde & Schwarz R&S SMB100B - HUMS Settings

Network operation and remote control
R&S
®
SMB100B
296User Manual 1178.3711.02 ─ 08
The "Closed" tab shows the currently active remote connections, and you can
enable the display of the active connections in the task bar.
Settings
SCPI Connections.......................................................................................................296
TCP/IP Connections....................................................................................................296
SCPI Connections
Lists the VISA resource strings of the last remote connections that have accessed the
instrument via the LAN interface before.
Remote command:
n.a.
TCP/IP Connections
Lists the types and client addresses of the last remote connections that had accessed
the instrument via the LAN interface before.
Remote command:
n.a.
11.5.7 HUMS settings
Requires R&S SMBB-K980.
Remote access settings